Anti Slip Abrasive Tape
 | Anti Slip Abrasive Tape
|
Product Description
Danger Ribbon Company is an anti slip abrasive tape manufacturer producing high-traction abrasive non skid grip tape for stairs, ramps, walkways, platforms, and industrial foot traffic areas. The tape is made with aluminum oxide or mineral abrasive grit bonded to PVC or PET backing, then coated with pressure-sensitive adhesive for fast application on prepared surfaces. It helps improve non-skid grip under wet and dry foot traffic, while careful surface bonding supports better grit retention and lower edge lifting risk.
Product Photos
Technical Data Sheet
Item | Typical Value |
Product Type | Anti slip abrasive tape |
Surface Material | Aluminum oxide grit or mineral abrasive grit |
Backing Material | PVC film or PET film |
Adhesive Type | Pressure-sensitive acrylic adhesive |
Total Thickness | 650 um - 900 um |
Common Width | 25 mm, 50 mm, 100 mm, 150 mm |
Common Length | 5 m, 10 m, 18 m, 20 m |
Standard Roll Size | 50 mm x 18 m |
Grit Size Reference | 46 grit - 80 grit, depending on traction requirement |
Peel Strength on Steel | 12 N/25 mm - 18 N/25 mm after 24 h dwell |
Temperature Range | -10 C to 60 C for normal service use |
Short-Term Heat Resistance | 80 C for 1 h sample exposure |
Internal Grit Retention Observation | No obvious bald patch after 500 dry shoe-rub cycles |
Initial Loose Grit Observation | Minor loose grit may appear during first rubbing cycle |
Edge Lifting Observation | Edge remains flat after 24 h on clean steel with roller pressure |
Recommended Surface | Sealed concrete, painted metal, tile, wood, smooth industrial flooring |
Surface Preparation | Clean, dry, oil-free surface with firm roller pressure |
Color Options | Black, yellow, gray, clear, red, custom color by production plan |
Application Method | Peel liner, position tape, press firmly, roll from center to edge |
Applications
- Factory stair treads where work shoes need stronger grip
- Ramps used by workers, carts, and maintenance teams
- Industrial walkways with repeated wet and dry foot traffic
- Steel platforms, mezzanines, and access floors
- Machine steps, ladder steps, and equipment entry points
- Loading area pedestrian paths with smooth painted surfaces
- Workshop routes where mineral grit improves shoe contact
- Back-of-house corridors, service areas, and maintenance routes
Product Overview
This anti slip abrasive tape is designed for walking surfaces where shoes need a firmer grip, especially on factory stairs, access ramps, painted walkways, service platforms, and equipment steps. The rough surface is not only a textured coating. It uses exposed mineral grit to create direct contact points for work shoes and safety boots, helping reduce the slippery feel often found on smooth, painted, or lightly worn floors.
For general use, PVC backing offers useful flexibility when the tape needs to follow slightly uneven or narrow surfaces. PET backing is often preferred when cleaner cutting edges, better dimensional stability, and more controlled thickness are important. Both backing options use pressure-sensitive adhesive, but the adhesive cannot perform well if the surface is dusty, oily, damp, loose, or heavily textured. In many field problems, early peeling starts from poor surface contact rather than from the top abrasive layer.
In internal sample observation, a 50 mm wide black PVC sample was applied to a cleaned painted steel panel and pressed with a hand roller. After 500 dry shoe-rub cycles, the abrasive surface showed no obvious bare patches. A small amount of loose grit appeared at the beginning, which is normal for grit-coated tape, but the surface still felt evenly rough by hand. After 24 hours of room-temperature bonding, the edge stayed flat on clean steel and sealed concrete samples.
Benefits
- Abrasive surface for shoe contact: Aluminum oxide and mineral abrasive grit create firm contact points for work shoes and safety boots.
- Stable non-skid grip: Helps improve traction on stairs, ramps, walkways, platforms, and access routes.
- Wet and dry foot traffic use: Suitable for areas where shoes may carry water, dust, or light workshop contamination.
- PVC/PET backing options: PVC supports flexibility, while PET offers better shape stability and cleaner edge cutting.
- Pressure-sensitive adhesive: Designed for clean, dry surfaces with firm roller pressure during installation.
- Improved grit retention: Resin-bonded abrasive grains help reduce early bald spots under repeated walking.
- Lower edge lifting risk: Rounded corners, dry surfaces, and proper pressure help the tape edge stay flatter.
- Practical sample checking:Grit shedding, surface sharpness, edge flatness, and adhesion can be checked before larger use.
What should you check before applying anti slip abrasive tape?
Before applying anti slip abrasive tape in busy walking areas, check whether the surface is clean, dry, firm, and smooth enough for adhesive contact. Dust, oil, loose paint, moisture, and rough concrete can all reduce bonding strength. For repeated shoe traffic areas, a small sample should be checked for adhesion, edge contact, and abrasive surface wear. If the grit sheds heavily, the backing curls, or the edge does not stay flat after firm pressure, further testing is recommended before wider installation.
How does the abrasive surface create stronger non-skid grip?
The abrasive surface works by keeping hard mineral grit exposed above the backing, giving shoes and work boots a rough contact point instead of a smooth walking surface. Aluminum oxide and similar mineral abrasive grit are used because they keep a sharp texture during repeated foot traffic. When bonded firmly to PVC or PET backing, the grit layer helps maintain traction on stairs, ramps, walkways, platforms, and high-use access routes. A good mineral grit non skid tape should keep most grit in place, resist early bald spots, and provide reliable grip without depending on a soft surface.
Packing Details
FAQ
Q1: Is this anti slip abrasive tape suitable for outdoor use?
Yes, it can be used in covered or general outdoor areas when the surface is clean, dry, and stable during installation. For constantly wet, rough, dusty, or uneven outdoor surfaces, sample testing is recommended before wider use.
Q2: Will the abrasive grit fall off during use?
A small amount of loose grit may appear during initial rubbing. Good-quality abrasive non skid grip tape should not develop fast bald spots, heavy grit loss, or smooth worn areas under normal shoe traffic.
Q3: How can edge lifting be reduced?
Clean the surface fully, keep it dry, round the tape corners, apply firm roller pressure, and avoid placing the tape edge where shoes, carts, or cleaning tools strike directly.
Q4: Can this tape be used on high-traffic industrial stairs?
Yes. High traction stair tread tape is suitable for industrial stairs when the substrate is smooth, bonded well, and inspected regularly for wear, edge lifting, grit loss, or surface contamination.