Barricade Tape For Traffic
 | Barricade Tape For Traffic
|
Product Description
Danger Ribbon Company is a manufacturer of barricade tape for traffic for roadwork zones, temporary lane closure, sidewalk separation, and municipal maintenance areas. This non-adhesive PE roll works as temporary traffic control tape, helping crews create a clear visual boundary for pedestrians and vehicles during short-term outdoor repair work. Produced in 35 um to 60 um film options, it is available in red/white or yellow/black for fast setup on cones, posts, fences, or roadside stakes.
Product Photos
Technical Data Sheet
Item | Typical Value |
Product Type | Non-adhesive traffic barricade tape |
Film Material | PE / LDPE |
Standard Width | 50 mm / 75 mm / 100 mm |
Standard Roll Length | 100 m / 200 m / 300 m / 500 m |
Film Thickness | 35 um / 40 um / 50 um / 60 um |
Thickness Tolerance | +/- 5 um |
Color Options | Red/white, yellow/black, custom traffic warning color |
Printing Method | Flexographic surface printing |
Print Repeat | 300 mm - 500 mm typical |
Tensile Strength | >= 18 MPa factory test reference |
Elongation at Break | >= 250 percent factory test reference |
Tear Resistance | Medium outdoor work-zone grade |
Unwind Performance | Smooth pull, low twist, low blocking |
Weather Resistance | Short-term outdoor rain and sunlight exposure |
Working Temperature | -10 C to 60 C |
Installation Method | Tie, wrap, staple, clip, or fasten to cones and posts |
Main Use | Roadwork, lane closure, pedestrian separation, municipal repair |
How should barricade tape for traffic be installed in outdoor roadwork zones?
Barricade tape for traffic works best when it is treated as a visual guidance line, not simply tied loosely around a work area. For temporary lane edges, sidewalk detours, curb repairs, and utility maintenance zones, the tape should be fixed to traffic cones, delineator posts, temporary fencing, or roadside stakes at regular intervals. A practical support spacing is 2 m to 3 m in open outdoor areas, with shorter spacing in windy locations. The tape should be pulled flat enough to keep the printed message readable, while still leaving slight flexibility to reduce tearing under wind pressure.
Product Overview
This roadwork barrier tape roll is designed for road crews, traffic contractors, and municipal maintenance teams that need a quick, visible boundary in changing outdoor work zones. In road repair, utility maintenance, curb work, parking-lot routing, and sidewalk diversion, the tape has to stay readable while crews move between different work points. Factory-controlled unwind tension helps the roll release smoothly, with lower twist, lower blocking, and less sudden film snapping during longer lane-edge or pedestrian-detour setup.
Color selection also matters in traffic-control use. Red/white rolls are often selected where access should be strongly limited, such as closed sidewalks, road repair edges, and utility trench approaches. Yellow/black rolls are more suitable for caution guidance around pedestrian routes, low-speed vehicle paths, and municipal repair areas. With a typical 300 mm to 500 mm print repeat, the warning message remains easier to recognize along extended work-zone lines. The tape is a visual boundary product, not a crash barrier or a replacement for rigid traffic-control equipment.
Benefits
- Helps mark temporary lane edges, sidewalk detours, shoulder work, and municipal maintenance zones before or alongside rigid barriers.
- Works as temporary lane closure tape when crews need a fast visual line between moving traffic and restricted repair sections.
- High-contrast red/white or yellow/black printing supports outdoor visibility for pedestrians, drivers, cyclists, and work crews.
- Non-adhesive PE structure allows quick tying, wrapping, stapling, clipping, or fastening to cones, posts, fences, and roadside stakes.
- Factory-controlled unwind tension supports smoother long-distance setup with lower risk of twisting, blocking, or sudden film breakage.
- Typical 300 mm to 500 mm print repeat keeps warning text readable across extended work-zone boundaries.
- 100 m to 500 m roll options help reduce splicing points along sidewalks, parking-lot lanes, curbside repair areas, and roadwork edges.
- Custom printed traffic messages, bilingual wording, municipal department names, and project identification can be produced for bulk traffic-control use.
Loading Details
What makes red/white or yellow/black barricade tape suitable for traffic control?
Red/white and yellow/black rolls give road crews a fast way to create a visible boundary when work conditions change during the day. Red/white is suitable for stronger access limitation, such as road repair edges, closed sidewalks, and restricted maintenance points. Yellow/black is useful for caution guidance around pedestrian separation lines, parking-lot traffic guidance, and low-speed municipal work zones. For traffic-control use, the roll should have strong color contrast, clean 300 mm to 500 mm repeat printing, stable PE film, and enough length to connect cones, posts, fences, and temporary warning points without excessive splicing.
FAQ
Q1: Is this tape adhesive or non-adhesive?
It is a non-adhesive barricade tape roll. It is designed to be tied, wrapped, clipped, stapled, or fastened to cones, posts, fences, barricades, and roadside stakes.
Q2: Can it be used for outdoor temporary traffic control?
Yes. It is made for short-term outdoor traffic guidance in roadwork zones, sidewalk detours, parking-lot repair, and municipal maintenance areas, with PE film designed for temporary rain and sunlight exposure.
Q3: Which color should be selected for traffic use?
Red/white is better for stronger restricted-access marking, while yellow/black is suitable for caution guidance, pedestrian routing, and visible work-zone separation.
Q4: Can the roll be printed with project-specific traffic messages?
Yes. As a manufacturer, Danger Ribbon Company can produce repeated warning text, bilingual wording, department names, project identification, or custom traffic-control messages for bulk use.